Queen Murphy Bed With Desk Diy

DIY Queen Murphy Bed with Desk: A Versatile Space-Saving Solution

If you're looking to maximize space and create a multifunctional room, a DIY Queen Murphy Bed with Desk is the perfect solution. This innovative piece of furniture combines the convenience of a fold-away bed with the practicality of a built-in desk, making it ideal for small apartments, guest rooms, or home offices. Here's a comprehensive guide to help you create your own Queen Murphy Bed with Desk:

### Materials You'll Need:

Queen-size mattress
4x8-foot sheet of 3/4-inch plywood
2x4x8-foot lumber (for framing)
2x6x8-foot lumber (for supports)
3/4-inch pocket hole screws
1 1/2-inch wood screws
Heavy-duty hinges
Gas springs (2 for Queen-size beds, 3 for King-size beds)
Desk surface (wood, metal, or laminate)
Legs or supports for the desk

### Step-by-Step Instructions:

1. Build the Bed Frame:

Cut the plywood into two 3x8-foot panels for the headboard and footboard. Cut 2x4 lumber to create a frame around the edges of the panels. Secure the frame using pocket hole screws. Reinforce the frame with additional 2x4 supports at the center and ends.

2. Create the Desk Frame:

Cut 2x4 lumber to create a rectangle that will support the desk surface. Reinforce the frame with additional supports as needed. Attach legs or bases to provide stability.

3. Attach the Desk to the Bed Frame:

Position the desk frame against the headboard, centered horizontally. Secure it to the headboard using 1 1/2-inch wood screws. Make sure the desk is level and securely attached.

4. Install the Mattress Platform:

Cut a 3x8-foot piece of plywood for the mattress platform. Drill evenly spaced pilot holes around the edges. Attach the platform to the footboard using 3/4-inch pocket hole screws. Countersink the screws to ensure a smooth surface for the mattress.

5. Mount the Hinges:

Position heavy-duty hinges on the headboard and footboard, facing each other. Secure the hinges using 1 1/2-inch wood screws. Ensure the hinges are aligned and allow for smooth folding.

6. Install the Gas Springs:

Measure and mark the appropriate locations for the gas springs. Attach the gas springs to the headboard and platform using the provided brackets and hardware. The gas springs will assist in lifting and lowering the bed.

7. Finish the Desk Surface:

Install the desired desk surface material onto the desk frame. Secure it using appropriate fasteners. Sand and finish the desk to match the desired aesthetic.

### Tips for Success:

Use high-quality materials for durability.
Measure and mark accurately to ensure proper alignment.
Reinforce the frame with additional supports for stability.
Test the gas springs before fully installing the bed to adjust tension if needed.
Add storage compartments or shelves to the desk for extra functionality.

### Conclusion:

Building a DIY Queen Murphy Bed with Desk is a rewarding and practical project that can transform your space. By following these detailed instructions and incorporating our tips, you can create a multifunctional piece of furniture that saves space, provides a comfortable sleeping area, and offers a dedicated workspace.