Monroe Upholstered Queen Bed Instructions

This document provides a comprehensive guide for assembling the Monroe Upholstered Queen Bed. Please read these instructions carefully before beginning assembly to ensure a smooth and successful process. Ensure all parts are present and accounted for by referencing the included parts list. Contact customer service if any parts are missing or damaged.

Tools Required: The following tools are required for assembly: Phillips head screwdriver, flathead screwdriver, rubber mallet (optional).

Step 1: Unpacking and Inventory: Carefully unpack all components from the shipping box. It is recommended to lay out all parts on a clean, flat surface to prevent damage and ensure easy access. Check against the provided parts list to verify everything is included. Keep all hardware in a safe place until needed.

Step 2: Headboard Assembly: Identify the headboard and the headboard side rails. Align the pre-drilled holes on the headboard side rails with the corresponding holes on the headboard. Securely fasten the side rails to the headboard using the provided bolts and washers. Tighten the bolts firmly using a Phillips head screwdriver. Do not overtighten.

Step 3: Footboard Assembly: Locate the footboard and the footboard support legs. Attach the support legs to the footboard using the designated bolts, washers, and nuts. Tighten securely using a Phillips head screwdriver and wrench if required. Ensure the legs are evenly attached for stability.

Step 4: Connecting the Side Rails: Identify the two longer side rails. Connect one end of each side rail to the headboard assembly using the appropriate hardware provided. Align the pre-drilled holes and fasten securely with bolts and washers. Repeat this process, connecting the opposite ends of the side rails to the footboard assembly.

Step 5: Center Support Beam Installation: Locate the center support beam and the support legs. Attach the support legs to the center support beam using the designated hardware. Position the assembled center support beam within the bed frame, ensuring it rests securely on the pre-installed support brackets within the side rails. Secure the center support beam to the side rails using the provided screws.

Step 6: Slat Installation: Carefully insert the slats into the designated slots on the side rails and the center support beam. Ensure the slats are evenly spaced and securely positioned. Most models feature a hook-in or drop-in system for the slats. Refer to the included diagrams for specific slat installation instructions.

Step 7: Upholstery Inspection: Carefully inspect the upholstery for any wrinkles, tears, or loose threads. Smooth out any wrinkles and tighten any loose buttons or tufting. If any significant damage is observed, contact customer service immediately.

Step 8: Mattress Placement: Carefully place the mattress on top of the slats. Ensure the mattress is evenly distributed within the frame.

Additional Notes for Specific Models:

Monroe with Storage: If assembling a Monroe model with storage drawers, follow the specific instructions provided for drawer assembly and installation. These instructions will detail how to connect the drawer slides and assemble the drawer boxes before attaching them to the bed frame.

Monroe with Trundle: For models with a trundle bed, refer to the separate trundle assembly instructions included with the product. These instructions will outline the proper steps for assembling the trundle frame and installing the casters.

Care and Maintenance: Regularly check all bolts and screws to ensure they are tightened. Clean the upholstered surfaces according to the manufacturer's recommendations. Avoid using harsh chemicals or abrasive cleaners. Dust regularly with a soft cloth or vacuum cleaner attachment. For stubborn stains, consult a professional upholstery cleaner.

Safety Precautions: Do not stand or jump on the bed frame. Do not allow children to climb on the headboard or footboard. Ensure the bed is placed on a level surface to prevent tipping. Do not modify or alter the bed frame in any way. Doing so may void the warranty and compromise the structural integrity of the bed.

Troubleshooting: If experiencing difficulties during assembly, double-check the instructions and diagrams to ensure all steps are being followed correctly. If issues persist, contact customer service for assistance. Provide the model number and a detailed description of the problem.

Warranty Information: Refer to the included warranty information for details regarding coverage and claims procedures. Retain proof of purchase and these assembly instructions for future reference.