How To Replace Sprung Bed Slats

How to Replace Sprung Bed Slats

Sprung bed slats provide support and comfort to your bed, but over time, they can become damaged or broken. Replacing them is a relatively easy task that can be completed in a few hours. Here's a step-by-step guide on how to do it:

Step 1: Gather Your Tools and Materials

You will need the following tools and materials:

New sprung bed slats
Phillips head screwdriver
Measuring tape
Pencil

Step 2: Remove the Old Slats

Start by removing the old slats. Most slats are held in place by screws or clips. Use a screwdriver to remove the screws or clips, and then carefully lift the slats out of the bed frame.

Step 3: Measure and Cut the New Slats

Measure the length of the old slats and cut the new slats to the same length. Use a pencil to mark the cut lines, and then use a saw to cut the slats.

Step 4: Insert the New Slats

Insert the new slats into the bed frame. Make sure that the slats are evenly spaced and that they are securely in place.

Step 5: Reattach the Screws or Clips

Reattach the screws or clips that hold the slats in place. Tighten the screws or clips until they are snug, but do not overtighten them.

Step 6: Enjoy Your New Slats

Your new sprung bed slats are now installed. Enjoy the added support and comfort that they provide.

Tips

If you are not comfortable replacing the slats yourself, you can hire a professional to do it for you.
Sprung bed slats are typically made of wood or metal. Wood slats are less expensive, but they are not as durable as metal slats.
The number of slats that you need will vary depending on the size of your bed. A twin bed typically requires 15-20 slats, while a full bed requires 18-25 slats and a queen or king bed requires 20-30 slats.
Sprung bed slats should be replaced every 5-7 years, or more often if they become damaged or broken.