How To Expand Metal Bed Frame

How to Expand a Metal Bed Frame

Expanding a metal bed frame is a relatively simple task that can be completed in a few minutes with the right tools. However, it is important to follow the instructions carefully to avoid damaging the bed frame. Here are the essential steps on how to expand a metal bed frame:

1. Gather your tools. You will need the following tools to expand a metal bed frame:

An adjustable wrench
A hammer
A tape measure
A Phillips screwdriver

2. Measure the desired length of the bed frame. Use the tape measure to determine the desired length of the bed frame. The length should be about 6 inches longer than your height.

3. Loosen the bolts that hold the side rails to the headboard and footboard. Use the adjustable wrench to loosen the bolts that hold the side rails to the headboard and footboard. Do not remove the bolts completely.

4. Pull the side rails apart to the desired length. Use your hands to pull the side rails apart to the desired length. Be careful not to pull the side rails too far apart, as this can damage the bed frame.

5. Tighten the bolts that hold the side rails to the headboard and footboard. Use the adjustable wrench to tighten the bolts that hold the side rails to the headboard and footboard. The bolts should be tight enough to hold the side rails in place, but not so tight that they damage the bed frame.

6. Attach the slats to the side rails. Use the Phillips screwdriver to attach the slats to the side rails. The slats should be spaced evenly apart to provide support for the mattress.

7. Place the mattress on the bed frame. Once the slats are attached, you can place the mattress on the bed frame. Make sure the mattress is centered on the bed frame and that there is no gap between the mattress and the side rails.

By following these steps, you can easily expand a metal bed frame to the desired length. Expanding a metal bed frame is a great way to add extra sleeping space to your home without having to purchase a new bed frame.