How To Build A Simple Platform Bed

How To Build A Simple Platform Bed: A DIY Guide

Building a simple platform bed is a great way to save money and customize your bedroom. It's also a relatively easy project that can be completed in a weekend. In this guide, we'll walk you through the steps on how to build a platform bed, including materials list, tools needed, and step-by-step instructions.

### Materials List:

Plywood (1/2-inch or 3/4-inch thick)
2x4 lumber (for the frame)
2x6 lumber (for the legs)
Wood screws (2-inch and 3-inch)
Wood glue
Sandpaper
Stain or paint (optional)

### Tools Needed:

Circular saw or miter saw
Drill
Screwdriver
Clamps
Level
Measuring tape
Hammer

### Step-by-Step Instructions:

1. Determine the size of your platform bed. The size of your platform bed will depend on the size of your mattress. To determine the size of your platform, measure the length and width of your mattress and add 6 inches to each measurement. For example, if your mattress is 54 inches wide and 75 inches long, your platform bed would be 60 inches wide and 81 inches long.

2. Cut the plywood for the top of the platform. Once you have determined the size of your platform bed, you can cut the plywood for the top. Cut the plywood to the length and width of your platform. If you are using 1/2-inch plywood, you may need to use two sheets of plywood and join them together with wood glue and screws.

3. Assemble the frame of the platform. The frame of the platform will be made from 2x4 lumber. Cut four pieces of 2x4 to the length of your platform. Then, cut two pieces of 2x4 to the width of your platform. Assemble the frame by attaching the four long pieces to the two short pieces using wood screws. Make sure that the frame is square and level before moving on to the next step.

4. Attach the legs to the frame. The legs of the platform will be made from 2x6 lumber. Cut four pieces of 2x6 to the desired height of your platform. Attach the legs to the frame using wood screws. Make sure that the legs are evenly spaced and that the platform is level.

5. Attach the plywood top to the frame. Once the frame is assembled, you can attach the plywood top. Spread a thin layer of wood glue on the top of the frame and then place the plywood on top. Secure the plywood to the frame using wood screws. Countersink the screws so that they are flush with the surface of the plywood.

6. Sand and finish the platform bed. Once the platform bed is assembled, you can sand and finish it. Sand the entire platform bed to smooth out any rough edges. You can then stain or paint the platform bed to match your décor.

7. Enjoy your new platform bed! Once the platform bed is finished, you can enjoy your new bed. The platform bed is a great way to add style and storage to your bedroom. It's also a relatively easy project that can be completed in a weekend.