How To Build A Simple King Size Platform Bed

How to Build a Simple King Size Platform Bed

A platform bed is a bed that has a raised platform instead of a headboard and footboard. This type of bed is easy to build and can be made to any size. Here are the essential steps on how to build a simple king size platform bed:

Materials

2x6 lumber (10 pieces 76" long)
2x4 lumber (4 pieces 76" long)
2x4 lumber (4 pieces 80" long)
Plywood (48"x84")
Wood screws
Wood glue
Clamps
Drill
Saw
Level
Measuring tape

Instructions

1. Cut the 2x4 lumber into the following pieces:

4 pieces 76" long (side rails)
4 pieces 80" long (headboard and footboard)

2. Cut the 2x6 lumber into 10 pieces that are 76" long (platform supports)

3. Assemble the side rails and headboard/footboard by screwing the 2x4 lumber together. Be sure to use wood glue and clamps to ensure a strong joint.

4. Attach the platform supports to the side rails using wood screws. Space the platform supports evenly.

5. Cut the plywood to fit the platform. The plywood should be 48" wide and 84" long.

6. Attach the plywood to the platform supports using wood screws. Be sure to countersink the screws so that they are flush with the surface of the plywood.

7. Sand the bed frame and apply a finish of your choice.

Tips

Use a level to ensure that the bed frame is level before attaching the plywood.
Pre-drill holes for the wood screws to prevent the wood from splitting.
Countersink the screws so that they are flush with the surface of the wood.
Apply a finish to the bed frame to protect it from moisture and wear.

Building a platform bed is a relatively easy project that can be completed in a few hours. With a little planning and effort, you can create a beautiful and functional bed that will last for years to come.