How To Build A Queen Size Platform Bed With Drawers

Building a platform bed with drawers is a great way to add extra storage to your bedroom. It's also a relatively easy project that can be completed in a weekend. Here are the steps on how to build a queen size platform bed with drawers:

Materials:

4x4 lumber for the legs (4)
2x6 lumber for the frame (2)
1x6 lumber for the slats (10)
1/2-inch plywood for the bottom of the bed
Drawer slides (4)
Screws

Tools:

Circular saw
Drill
Screwdriver
Measuring tape
Level

Instructions:

Cut the lumber.

First, you need to cut all of the lumber to the correct size. The legs should be 18 inches long, the frame should be 60 inches long, and the slats should be 54 inches long. 2.

Assemble the frame.

Next, you need to assemble the frame. To do this, simply screw the 2x6 lumber together to form a rectangle. 3.

Attach the legs.

Once the frame is assembled, you need to attach the legs. To do this, simply screw the legs into the corners of the frame. 4.

Install the drawer slides.

Now, it's time to install the drawer slides. To do this, simply screw the drawer slides to the bottom of the frame and to the sides of the drawers. 5.

Install the plywood.

The next step is to install the plywood to the bottom of the bed. To do this, simply screw the plywood to the frame. 6.

Install the slats.

Finally, it's time to install the slats. To do this, simply screw the slats to the frame, evenly spacing them apart.

Tips:

Make sure to level the frame before you attach the legs.

Use a drill to pilot holes for the screws to prevent the wood from splitting.

If you're not sure how to install the drawer slides, you can refer to the instructions that came with the slides.

Conclusion:

Building a platform bed with drawers is a great way to add extra storage to your bedroom. It's also a relatively easy project that can be completed in a weekend. By following the steps outlined in this article, you can build your own platform bed with drawers in no time.