How To Build A Platform Bed King Size

Platform beds are a great way to add a modern and stylish touch to your bedroom. They are also relatively easy to build, making them a great project for beginners. In this article, we will provide you with step-by-step instructions on how to build a platform bed king size.

Materials You Will Need:

8 (2x6) boards, 8 feet long
4 (2x4) boards, 8 feet long
1 (4x4) post, 8 feet long
1 (3/4-inch) plywood sheet, 8 feet x 4 feet
12 (2-inch) wood screws
12 (1-1/2-inch) wood screws
Wood glue
Sandpaper

Tools You Will Need:

Circular saw
Drill
Countersink bit
Clamps
Sander

Instructions:

Step 1: Cut the Boards

Begin by cutting the 2x6 boards to the following lengths:

4 boards at 84 inches
4 boards at 76 inches

Cut the 2x4 boards to the following lengths:

2 boards at 84 inches
2 boards at 60 inches

Cut the 4x4 post to the following length:

1 post at 76 inches

Cut the plywood sheet to the following size:

1 sheet at 84 inches x 60 inches

Step 2: Assemble the Frame

Lay the 4 longer 2x6 boards on the floor, parallel to each other, and 84 inches apart. Attach the 2 shorter 2x4 boards to the ends of the 2x6 boards using wood screws. Make sure that the 2x4 boards are flush with the edges of the 2x6 boards.

Next, attach the remaining 2 2x6 boards to the other ends of the 2x4 boards, again using wood screws. Make sure that the 2x6 boards are flush with the ends of the 2x4 boards.

Finally, attach the 4x4 post to the center of one of the long sides of the frame, using wood screws. The post should be flush with the top of the frame.

Step 3: Attach the Plywood

Place the plywood sheet on top of the frame, and attach it using wood screws. Make sure that the plywood is flush with the edges of the frame.

Step 4: Sand and Finish

Sand the entire bed frame to remove any rough edges. You can then apply a stain or paint to the bed frame, as desired.

Step 5: Enjoy Your New Bed!

Congratulations! You have now successfully built a platform bed king size. Enjoy your new bed!