How To Build A Platform Bed Frame King Size

Building a king-size platform bed frame is a simple and rewarding project that can save you money and add a personal touch to your bedroom. By following these steps and understanding the essential aspects of building a platform bed frame, you can create a sturdy and stylish piece of furniture that will last for years.

Materials

8 (2x6) lumber cut to 84 inches long
8 (2x6) lumber cut to 76 inches long
16 (2x4) lumber cut to 76 inches long
12 (2x4) lumber cut to 36 inches long
12 (2x4) lumber cut to 30 inches long
4 (1x6) lumber cut to 84 inches long
4 (1x6) lumber cut to 76 inches long
Wood screws
Wood glue
Sandpaper
Stain or paint (optional)

Tools

Drill
Circular saw
Miter saw
Brad nailer
Clamps
Level
Tape measure
Pencil

Instructions

Lay out the 8 (2x6) lumber cut to 84 inches long on a flat surface. These will form the side rails of the bed frame.
Lay out the 8 (2x6) lumber cut to 76 inches long on top of the side rails. These will form the end rails of the bed frame.
Attach the end rails to the side rails using wood screws and wood glue. Make sure the end rails are flush with the ends of the side rails.
Lay out the 16 (2x4) lumber cut to 76 inches long on top of the end rails. These will form the slats of the bed frame.
Attach the slats to the end rails using wood screws and wood glue. Make sure the slats are evenly spaced.
Lay out the 12 (2x4) lumber cut to 36 inches long on top of the side rails. These will form the legs of the bed frame.
Attach the legs to the side rails using wood screws and wood glue. Make sure the legs are evenly spaced.
Lay out the 12 (2x4) lumber cut to 30 inches long on top of the legs. These will form the top rails of the bed frame.
Attach the top rails to the legs using wood screws and wood glue. Make sure the top rails are flush with the tops of the legs.
Lay out the 4 (1x6) lumber cut to 84 inches long on top of the top rails. These will form the side trim of the bed frame.
Attach the side trim to the top rails using wood screws and wood glue. Make sure the side trim is flush with the edges of the top rails.
Lay out the 4 (1x6) lumber cut to 76 inches long on top of the side trim. These will form the end trim of the bed frame.
Attach the end trim to the side trim using wood screws and wood glue. Make sure the end trim is flush with the ends of the side trim.
Sand the bed frame to remove any rough edges.
Stain or paint the bed frame (optional).

Conclusion

Building a king-size platform bed frame is a relatively simple project that can be completed in a few hours. By following these steps and understanding the essential aspects of building a platform bed frame, you can create a sturdy and stylish piece of furniture that will last for years.