Diy Queen Storage Bed With Drawers

DIY Queen Storage Bed with Drawers: A Guide to Create Your Dream Bed

A storage bed with drawers is a practical and space-saving solution for any bedroom. Whether you're short on storage or simply want to declutter, a DIY queen storage bed with drawers can provide the perfect solution. Here's a comprehensive guide to help you build your own storage bed from scratch:

Materials and Tools

To build a queen storage bed with drawers, you will need the following materials and tools:

Queen-size mattress and box spring
2x4 lumber (for the frame and drawer supports)
1x12 lumber (for the side panels and drawer fronts)
1/2-inch plywood (for the bed platform and drawer bottoms)
3/4-inch plywood (for the headboard and footboard)
Drawers slides
Drawer pulls
Wood screws
Wood glue
Drill
Circular saw or miter saw
Countersink bit
Clamps
Level
Measuring tape
Pencil

Building the Frame

Begin by building the frame of the bed. Cut two 2x4s to the length of the headboard and two 2x4s to the length of the footboard. Assemble the frame by attaching the headboard and footboard to the side rails using 3-inch wood screws. Reinforce the corners with wood glue and additional screws.

Creating the Drawers

Next, construct the drawers. Cut the 1x12 lumber to the desired width and length of the drawers. Assemble the drawer sides and fronts using wood glue and 1-1/4-inch wood screws. Countersink the screws to create a flush finish. Attach the plywood bottoms to the drawers using wood glue and 1-inch wood screws.

Installing the Drawer Slides

Install the drawer slides on the inside of the bed frame and the bottom of the drawers. Ensure that the slides are properly aligned and screwed in securely. This will allow the drawers to slide smoothly and support the weight of their contents.

Attaching the Drawer Fronts

Attach the drawer fronts to the drawers using wood glue and 1-1/4-inch wood screws. Countersink the screws and fill the holes with wood filler. Sand the drawer fronts smooth and apply a finish of your choice.

Building the Bed Platform

Cut the 1/2-inch plywood to the size of the mattress and box spring. Place the plywood on top of the bed frame and secure it with 2-inch wood screws. Countersink the screws and fill the holes with wood filler.

Creating the Headboard and Footboard

Cut the 3/4-inch plywood to the desired shape and size of the headboard and footboard. Attach the headboard and footboard to the bed frame using wood glue and 3-inch wood screws. Countersink the screws and fill the holes with wood filler. Sand the headboard and footboard smooth and apply a finish of your choice.

Finishing Touches

Sand the entire bed frame and drawers smooth and apply a finish of your choice, such as paint, stain, or polyurethane. Attach the drawer pulls and enjoy your new queen storage bed with drawers!