Diy King Platform Bed With Storage Underneath

DIY King Platform Bed with Storage Underneath: A Comprehensive Guide to Building and Customizing Your Dream Bed

Are you ready to upgrade your bedroom with a stylish and practical king platform bed that offers ample storage space? Building your own platform bed with storage underneath is a rewarding project that can save you money and add a touch of personalization to your home. In this comprehensive guide, we'll walk you through every step of the process, from gathering materials to customizing the design. Let's get started!

Materials Required

Lumber: 10-12 2x4s (8 feet long) for the frame, 12 1x12s (8 feet long) for the platform, and 6 1x8s (8 feet long) for the drawer sides and fronts
Plywood: 3/4-inch plywood (4 feet x 8 feet) for the mattress support
Wood screws: 2-inch and 3-inch
Casters: 4 locking casters (3-inch diameter)
Drawer slides: 2 sets of full-extension drawer slides (18-inch length)
Wood glue
Sandpaper
Finishing materials: Stain, paint, or polyurethane

Step-by-Step Instructions

1. Building the Frame

Begin by creating the frame for your platform bed. Measure and cut 8 2x4s to 84 inches long. Join them together using 3-inch wood screws to form a rectangle. For added strength, add two additional 2x4s as cross supports, attaching them 12 inches from each end with 2-inch screws.

2. Assembling the Platform

Cut 12 1x12s to 76 inches long. These will serve as the platform that supports your mattress. Align the boards evenly on top of the frame and secure them with 2-inch screws. Ensure that there are no gaps between the boards.

3. Adding Plywood Support

Cut a piece of 3/4-inch plywood to 72 inches x 76 inches. Place it on top of the platform and attach it using 2-inch screws. This plywood layer will provide additional support for your mattress.

4. Building Drawers

For each drawer, cut two 1x8s to 24 inches long and two to 36 inches long. Assemble the drawer sides and fronts using wood glue and 2-inch screws. Cut a piece of plywood to 22 inches x 34 inches to form the drawer bottom. Attach it to the frame using 1-inch wood screws.

5. Installing Drawer Slides

Screw one half of each drawer slide to the inside of the frame, 16 inches from the bottom. Attach the other half to the bottom of each drawer.

6. Adding Casters

Attach the locking casters to the corners of the frame to allow easy mobility. Make sure to secure them tightly with 2-inch screws.

7. Finishing Touches

Sand the bed frame and any exposed surfaces to remove any rough edges. Apply your desired finishing material, such as stain, paint, or polyurethane, to protect and enhance the wood.

Customizing Your Platform Bed

Once you've built the basic platform bed, you can customize it to suit your style and needs:

* Add a headboard: Design and build a headboard to match the style of your bed. * Incorporate storage shelves: Add shelves to the sides or footboard of the bed for additional storage. * Use different materials: Consider using different types of wood or finishes to create a unique look. * Accessorize: Add bedding, pillows, and other accessories to complement your bed and its storage capabilities. Building your own DIY king platform bed with storage underneath is an achievable and rewarding project. By following these step-by-step instructions and incorporating your own customization ideas, you can create a functional and stylish addition to your bedroom that will provide both comfort and ample storage space for years to come.